version:01 rrm j c db201 thru DB207 features mechanical data case: db - m, molded plastic terminals: plated leads solderable per mil - std - 202, method 208 polarity: as marked on case mounting position: any marking: type number lead free: for rohs / lead free maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. type number symbol db201 db202 db203 db204 db205 db206 DB207 units peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v 50 100 200 400 600 800 1000 v v rwm v dc rms reverse voltage v rms 35 70 140 280 420 560 700 v average rectified output current (note 1)@t a =40 i o 2.0 a non - repetitive peak forward surge current 8.3ms single half sine - wave superimposed on rated load (jedec method) i fsm 60 a forward voltage per element @if=2.0a v fm 1.1 v peak reverse current @t a =25 at rated dc blocking voltage @t a =125 i r 5.0 500 ua typical junction capacitance per leg 25 pf typical thermal resistance per leg (note 2) r ja 40 /w r jl 15 operating and storage temperature range t j ,t stg - 55to+150 note:1. mounted on glass epoxy pc board with 1.3mm 2 solder pad. 2.measured at 1.0 mhz and applied reverse voltage of 4.0v d.c. 1 of 2 www.dyelec.com 0 glass passivated die construction low forward voltage drop high current capability high surge current capability designed for surface mount application plastic material - ul flammability 94v - 0.358 0.335 9.1 8.5 0.024 0.016 0.60 0.40 0.193 0.209 4.9 5.3 0.179 0.195 4.55 4.95 8.9 0.350 8.0 0.315 0.0098 0.25 0.313 7.95 0.329 8.35 0.083 2.10 0.240 6.1 - + ~ ~ db-m 0.256 6.5 0.0059 0.15 0.098 2.50 dimensions in inches and millimeters version single phase 2.0amp surface mount glass passivated bridge rectifier 0.047 1.20 0.95 0.037
version:01 db201 thru DB207 2 of 2 60 1.99 5 0.5 40 20 pulse width =8.3ms 0 1.0 10 i , peak for w ard surge current (a) fsm number of cycles at 60 hz fi g . 3 maximum peak forward sur g e current ( per le g) t = 25 c single half sine-wave (jedec method) a 0.01 0.1 1.0 10 0.2 0.6 1.0 1.4 i , inst ant aneous for w a rd current ( a) f v , instantaneous forward voltage (v) fi g .2t y pical forward characteristics ( per le g) f t=25c pulse width = 300 s 0.4 0.8 1.2 1.6 0 0 40 80 120 160 i , a verage for w a rd rectified current (a ) (a v) t , ambient temperature ( c) fi g . 1 output current deratin g curve a resistive or inductive load 1 2 a 0.01 0.1 1.0 10 100 0 20 40 60 80 100 120 140 i , inst ant aneous reverse current ( a) r percent of rated peak reverse voltage (%) fi g y pical reverse characteristics ( per element ) t = 25 c t = 125 c j j www.dyelec.com .4 t
|
